Height of Kitchen Chimney: What specifically should it be for best performance?

If the Height of Kitchen Chimney is incorrect, its performance may suffer. So you must know before installation.

Do you realize that a kitchen chimney installed properly not only improves performance but also looks out for everyone’s safety?

If your home is getting a new kitchen chimney or an upgrade, you should be aware of certain important factors including installation height, suction capacity, stove type, ducting, etc.

Many people believe that correctly calculating these factors might be difficult, but trust me, it won’t be.

It’s usually a good idea to have a qualified expert by your side if you don’t have experience installing machines to ensure that you don’t do anything to damage your chimney.

Even though hiring a professional to build a chimney is usually recommended, you are not required to do so; you only need the right advice and information to ensure a hassle-free process.

Why is height an important factor?

The height of the kitchen chimney plays a crucial role in venting hot air from the kitchen outside the house. The chimney might catch fire if it is installed too close to the stove.

If a chimney is put beyond the maximum recommended level, it becomes harder to draw air via the chimney and its efficiency suffers. As a result, it is essential to keep an optimal level from stove to chimney hood.

What should be the correct height?

To get the correct height from the kitchen hood and stove, use the kitchen height calculator.

The height of the chimney is also determined by the kind of stove, the height of the user, and the most significant needed suction power of the chimney based on the size of the kitchen.

By comparing the different types of stoves and the maximum and minimum height requirements, you may learn the normal height of the chimney from the kitchen platform.

Kitchen Chimney Height Calculation

Different types of stoves	Maximum, and minimum height recommendations (Chimney height from the gas stove)
Gas Stove	24 inches to 30 inches
Induction Cooktop	21 inches to 30 inches
Electric Stove	21 inches to 30 inches

Things to Keep in Mind When Calculating Kitchen Chimney Height From Stove

Size Of Chimney Hood

It’s best if your chimney is a little bit bigger than your cooktop if you want to put a cooker hood in your home. The chimney will fit reasonably safely at a higher location and be able to gather the smoke with ease.

Type of stove

Depending on the type of stove you have, determine the height of your kitchen chimney. The chimney height for an electric or induction stove should be between 21 and 30 inches high; for a gas oven, 24 to 30 inches is ideal.

Suction capacity

The amount of suction also has a significant impact on chimney height. In order to properly and swiftly move gases out of your home, a taller chimney has a higher suction capacity.

Length of duct and Number of Bends

Your duct should never be longer than 12 feet. Your suction’s effectiveness is impacted by several bends (and hence, multiple joints). Avoid any installation that might send fumes on a detour through your home rather than going straight from the source to the intended location.

Installing ducting away from entrances, dining areas, closets, and even ceiling hatch doors is advised. They could have to go through dangerous areas to round the perimeter, which would reduce productivity and make you spend more time cleaning than was required.

Installing the chimney no higher than 30 inches away from the cooking surface will guarantee that this natural airflow successfully pulls the smoke up and out.

Conclusion

The only way to get a chimney to work at its optimum is at a precise height. The reason being that the exhaust and suction power would be impacted if the height exceeded the appropriate parameters.

Additionally, fire mishaps might result from anything lower than the ideal height.

FAQ